Application Notes
Sales Code: 901-272-EX

Net2 PaxLock MIFARE® – 72mm Euro

Wireless Net2 access control
Can be fitted in minutes
Reports back to the Net2 server in real time
Full battery management system
Euro profile lock case compatibility
Key override option

About – Net2 PaxLock is a battery powered Net2 access control unit in a slimline door handle. Net2 PaxLock comes ready to fit a standard Euro profile lock case (sold separately). It communicates with the Net2 server PC using the low power and secure wireless technology of Net2Air. Net2 PaxLock is designed for use with Net2Air Ethernet bridges to give the advantages of a wireless networked access control system. Net2 PaxLock is simple to use and fast to fit because it is not wired into a mains power source; it is ideal for internal doors.

Installation – Fit the chosen mortice lock to the door and place the template provided over the spindle. Use the template to drill the required holes and then cut the spindle to the required size. Secure the Net2 PaxLock to the door and insert the batteries. Bind the unit to the Net2 system by presenting a pre-enrolled token.

Please note: A key cylinder is not provided with Net2 PaxLock or sold by Paxton, this item will need to be purchased separately from another supplier.

Operation – Any changes made at the PC are communicated and stored at the Net2 PaxLock. When a user presents their token to the reader, the Net2 PaxLock identifies them and permits or denies access as appropriate.

Net2 PaxLock MIFARE® versions are compatible with the following tokens: MIFARE Classic 1K and 4K implementationMIFARE Ultralight and MIFARE DESFire.

MIFARE, MIFARE Classic, MIFARE Ultralight and MIFARE DESFire are trademarks of NXP B.V. and are used under license.

MIFARE® 72mm version info:

PaxLock – 19mm dia. handles, boxed

PaxLock- Drive follower bar assy, 8mm with pin

Secure cover – 72mm offset with foam pad

PaxLock – Mifare, 72mm unsecure side, ver 1.5

Application Notes