Print

Net2Air Bridge


  • Wireless link from a Net2 PC to Net2 nano and PaxLock control units
  • Plugs into the existing LAN/WAN
  • Multiple bridges can be placed around a site
  • Gives more flexibility on placing Net2 nano and PaxLock control units
  • Power over Ethernet
About - The Net2 nano and PaxLock range of access control units uses Paxton Access' Net2Air wireless technology to communicate with the Net2 software.

The Net2Air bridge provides the wireless communication link between the PC running Net2 software and Net2 nano or PaxLock control units. Multiple bridges can be placed around a site and linked back to the PC via LAN/WAN. Net2 nano and PaxLock control units can, therefore, be installed at a greater distance away from the PC running Net2 software.




Installation - The unit plugs into the LAN/WAN by means of a standard RJ45 network port. The Net2Air bridge driver software is loaded from the Net2 software. Once the Net2Air bridge has been detected by the PC, run the Net2 server configuration program to register the bridge with the server program. The Net2 software will include the bridge in its list of ports to be monitored. Wireless communication can be established through Net2 software to products using Net2Air technology like Net2 nano or PaxLock. We recommend a maximum of 10 wireless control units per bridge.


Operation - Once plugged in, the Net2Air bridge provides the communication between the Net2 nano or PaxLock control units and the PC.



Sales code Description
477-600-USNet2Air Bridge